Introduction of structure and advantages of stainless steel submersible pump

Time:

2023-07-27

There is a suction device at the bottom of the stainless steel submersible electric pump motor. The water pump will cause a large pressure on the inner cavity of the motor during long-term operation, causing the water pump motor to burn down. The function of the suction device is to press the pressure generated by the long-term operation of the water pump into the suction device, which will not generate too much pressure on the motor. The pressure in the suction device will be slowly released when the pump stops, which will protect the pump motor, the service life of the pump is greatly increased.

Introduction of structure and advantages of stainless steel submersible pump

Stainless steel submersible pump what we do not know the use of exquisite?

The motor shall be fully submerged, not exceeding 70 metres. If the motor is exposed to the water, long-term operation may cause the motor to heat up quickly, burn the fragile parts inside the motor, and cause damage to the pump. The water temperature should not be too high, requiring less than 20 degrees, because the pump heats up quickly when the motor starts, and the motor cooling depends on the liquid flow. If the water temperature is too high, the heat dissipation effect of the motor is not good, and long-term use may cause serious problems. The solids content of the water does not exceed 0.01 percent. In the classification of axial flow pump, the division of clean water pump and sewage pump is relatively clear, in which the clean water pump can not transport liquid with more particles and impurities, and the stainless steel submersible pump naturally belongs to the clean water pump, so the lower the solid content, the better. If there are too many impurities, it is easy to cause the pump to block and reduce the transmission efficiency.