How to extend the service life of stainless steel submersible pump

Time:

2023-07-27

The use of stainless steel submersible pump cannot be separated from the maintenance of the staff, but many customers will ignore this point in many cases, resulting in frequent failures of the machine, resulting in small losses. In order to make everyone use it more smoothly in the future, check the cable, power switch, electric shock protector, etc. before using the stainless steel submersible pump. The power switch and other household appliances should operate normally, and the cable should not be damaged. At the same time, attention should be paid to carefully identifying the cable. As the yellow and green double-color wires are wire connectors, safety accidents can be avoided.

At regular intervals, check the grounding resistance of the submersible pump before use, which should not be less than 0.5 MΩ. If it does not meet the requirements, it needs to be dried. Regularly maintain the water filling hole and oil inlet, and tighten it if there is no abnormality.

After 300h of operation, the stainless steel submersible electric pump needs to be checked by adding water. If the released or water-oil-water mixture is less than 25mL, it can continue to be used, otherwise, it is necessary to check whether the hood and silicone sealing ring are damaged.

Since the stainless steel submersible electric pump is usually used in water, it should be debugged outside the water for no more than 5min to avoid the burning of the motor. The maintenance of stainless steel submersible pump can not only ensure the work of machinery and equipment, but also increase the service life of the machine and reduce the operating cost of the enterprise.